Areas of research interest

Welding Process Control and Welding Automation

Innovative Welding Process

Simulation and Intelligent Control of Material Processing

Teaching

Welding Automation (Undergraduate Course)

Selected publications (Journal articles, patents and books)

[1] Zuo Di, Hu Shengsun, Shen Junqi*, Xue Zhiqing. Intermediate layer characterization and fracture behavior of laser-welded copper/aluminum metal joints [J]. Materials & Design, 2014, 58: 357-362.

[2] Wu Wenyong, Hu Shengsun, Shen Junqi*. Microstructure, mechanical properties and corrosion behavior of laser welded dissimilar joints between ferritic stainless steel [J]. Materials & Design, 2015, 65: 855-861.

[3] Wang Peng, Hu Shengsun, Shen Junqi*, Liang Ying, Pang Jie. Effects of electrode positive/negative ratio on microstructure and mechanical properties of Mg/Al dissimilar variable polarity cold metal transfer welded joints [J]. Materials Science & Engineering A, 2016, 652: 127-135.

[4] Ding Lin, Hu Shengsun, Quan Xiumin, Shen Junqi*. Effect of VN alloy addition on the microstructure and wear resistance of Co-based alloy coatings [J]. Journal of Alloys and Compounds, 2016, 659: 8-14.

[5] Ma Li, Hu Shengsun, Shen Junqi*, Han Jian, Zhu Zhixiong. Effects of Cr content on the microstructure and properties of 26Cr-3.5Mo-2Ni and 29Cr-3.5Mo-2Ni super ferritic stainless steels [J]. Journal of Materials Science & Technology, 2016, 32: 552-560.

[6] Ding Lin, Hu Shengsun, Quan Xiumin, Shen Junqi*. Effect of Mo and nano-Nd2O3 on the microstructure and wear resistance of laser cladding Ni-based alloy coatings [J]. Applied Physics A, 122: Article No. 288.

[7] Zhang Hao, Hu Shengsun, Shen Junqi*, Li Dalong, Bu Xianzheng. Effect of laser beam offset on microstructure and mechanical properties of pulsed laser welded BTi-6431S/TA15 dissimilar titanium alloys [J]. Optics & Laser Technology, 2015, 74: 158-166.

[8] Zhang Heng, Hu Shengsun, Shen Junqi*, Ma Li, Yin Fengliang. Microstructures and mechanical properties of 30Cr-4Mo ferritic stainless steel joints produced by double-pulsed gas metal arc welding [J]. International Journal of Advanced ManufacturingTechnology, 2015, 80: 1975-1983.

[9] Li Yang, Hu Shengsun, Shen Junqi*, Liu Lala. Microstructures and mechanical properties of H62 brass-316L stainless steel in overlap welded joints by continuous-wave laser [J]. International Journal of Advanced ManufacturingTechnology, 2015, 79: 627-634.

[10] Zuo Di, Hu Shengsun, Shen Junqi*, Xue Zhiqing. Modeling of keyhole dynamics and analysis of energy absorption efficiency based on Fresnel law during deep-penetration laser spot welding [J]. Computational Materials Science, 2015, 97: 48-54.

[11] Li Yang, Hu Shengsun, , Shen Junqi*, Hu Bao. Dissimilar welding of H62 brass-316L stainless steel using continuous-wave Nd YAG laser [J]. Materials and Manufacturing Processes, 2014, 29: 916-921.

[12] Li Yang, Hu Shengsun, , Shen Junqi*. The effect of peak power and pulse duration for dissimilar welding of brass to stainless steel[J]. Materials and Manufacturing Processes, 2014, 29: 922-927.

[13] Ma Li, Han Jian, Shen Junqi*, Hu Shengsun. Effects of microalloying and heat-treatment temperature on the toughness of 26Cr-3.5Mo super ferritic stainless steels [J]. Acta Metallurgica Sinica (English Letters), 2014, 27: 407-415.

[14] Wu Wenyong, Hu Shengsun, Shen Junqi*, Ma Li, Han Jian. Sensitization of 21% Cr ferritic stainless steel weld joints fabricated with/without austenitic steel foil as interlayer [J]. Journal of Materials Engineering and Performance, 2015, 24: 1505-1515.

[15] Li Dalong, Hu Shengsun, , Shen Junqi*, Zhanghao, Bu Xianzheng. Microstructure and mechanical properties of laser-welded joints of Ti-22Al-25Nb/TA15 dissimilar titanium alloys [J]. Journal of Materials Engineering and Performance, 2016, 25: 1880-1888.

• Welding Process Control and Welding Automation
  Innovative Welding Process
  Simulation and Intelligent Control of Material Processing

• 暂无内容