School of Mechanical Engineering
Professor
tju_ylkang@tju.edu.cn
Peiyang Park Campus: No.135 Yaguan Road, Haihe Education Park, Tianjin
Yilan Kang, She is a Professor of Department of Mechanics in School of Mechanical Engineering in Tianjin University. She obtained BA degree in 1982, MS degree in 1988, Ph.D. degree in 1992. She worked as visiting scholar in Bergische Wuppertal University and Stuttgart University (Germany) and in Ryerson University (Canada) and in Oakland University (USA). Her research field is in Experimental Mechanics technology and Materials Mechanics. She has research experience in the field of experimental mechanics by optical and spectral methodology,and measurement for physical and mechanical Properties of nanomaterials by experimental mechanics.
- Doctoral degree| Tianjin University| Experimental mechanics| 1992
- Master’s Degree| Tianjin University| Solid mechanics| 1987
- Bachelor’s Degree| Tianjin University| Applied mechanics| 1982
- Coupled Mechano-Electro-Chemical Process
- Mechanical Properties of the Interface Between Graphene and Substrates
- Mechanical Characterization of the Load on Shield Tunneling Machine
- Experimental Mechanics
- Solid Mechanics
-
No content
-
No content
-
1982.1-2019.12
School of Mechanical Engineering | Tianjin university | Assistant professor, Associate professor, Professor, Doctoral supervisor  -
2002.6-2002.11
 Wuppertal university in German | Visiting scholar by DFG project  -
1996.5-1996.12
 Ryerson University in Canada and Oakland University in USA | Visiting scholar  -
1992.9-1993.6
Experimental Mechanics | Bergische Wuppertal University, Germany | Post D 
- Papers
- [1] HaimeiXie, QianZhang, HaibiSong, BaoqinShi,YilanKang,“Modeling and in situ characterization of lithiation-induced stress in electrodes during the coupled mechano-electro-chemical process, Journal of Power Sources, 2017,342(1):896-903, (SCI:EN7MG, EI:20170203239710).
- [2] ChaochenXu, TaoXue, WeiQiu, YilanKang,“Size Effect of the Interfacial Mechanical Behavior of Graphene on a Stretchable Substrate”, ACS APPLIED MATERIALS & INTERFACES, 2016, 8(40):27099-27106. (SCI:DY9QD, EI:20164302930865).
-
- [3] Qian Zhang,Cuixia Su,Qinghua Qin,Zongxi Cai,Zhende Hou,YilanKang, “Modeling and prediction for the thrust on EPB TBMs under different geological conditions by considering mechanical decoupling”,Science China Technological Sciences, 2016,59(9) :1428-1434. (SCI:DV5TZ,EI: 20163402723276).
- [4] Xiaohua Tan, Wei Qiu, Yilan Kang, Donghui Fu, Xiaolei Li, Xia Xiao, “Experimental analysis on soft material contact problems by digital moiré and embedded-grating methods”,Acta Mechanica Solida Sinica, 2015, 28(3):252-261. (SCI: CO1FL, EI: 20153101094199).
- [5] Qian Zhang, Zhende Hou, Ganyun Huang,Zongxi Cai, Yilan Kang, “Mechanical characterization of the load distribution on the cutterhead ground interface of shield tunneling machines”, Tunnelling and Underground Space Technology, 2015, 47:106-113.( SCI: CC6ZY, EI:20150500482475 ).
- [6] Chaochen Xu, Tao Xue, Jiangang Guo, Yilan Kang, Wei Qiu, Haibin Song,Haimei Xie, “An experimental investigation on the tangential interfacial properties of graphene: Size effect”,Materials Letters, 2015, (161) :755–758,( SCI: CW3KR, EI: 20154101352499).
- [7] Huimin Xie, Yilan Kang,“Digital image correlation technique”, Optics and Lasers in Engineering, 2015, (65): 1-2.( SCI: AU3DI).
- [8] Yilan Kang, Huimin Xie, Yuhjin Chao, “Special Issue on Multi-Scale Experimental Measurements in Mechanics”, Experimental Mechanics, 2014. 54(1):1-2. (SCI:302VM, EI:20140517261118 ).
- [9] Qian Zhang, Chuanyong Qu, Zongxi Cai, Yilan Kang, Tian Huang,“Modeling of the thrust and torque acting on shield machines during tunneling”, Automation in Construction 2014, 40(15): 60-67 . (SCI:AD8BO, EI:20140617274278).
- [10] Xiaohua Tan, Yilan Kang, EannPatterson., “An experimental study of the contact of a rounded rigid indenter with a soft material block, Journal of Strain Analysis for Engineering Design”, 2014, 49(2):112-121. (SCI:292SA, EI:20141817667540 ).
- [11] Wei Qiu, ShileiLi, WeilinDeng, DiGao, Yilan Kang, “Strain Sensor of Carbon Nanotubes in Microscale: From Model to Metrology”,Hindawi Publishing Corporatione Scientific World Journal, 2014(2014):1-9. (SCI:AB5MB).
- [12] Wei Qiu, Yilan Kang,”Mechanical behavior study of microdevice and nanomaterials by Raman spectroscopy”, Chin. Sci. Bull. 2014,59(23):2811–2824, (SCI:AK8CV).
- [13] Weilin Deng, Wei Qiu, Qiu Li, Yilan Kang, JiangangGuo, Yilin Li, Sung Soo Han, “Multi-scale experiments and interfacial mechanical modeling of carbon nanotube fibers”, Experimental Mechanics, 2014,54 (1) : 3-10.(SCI:302VM, EI: 20140517261119 ).
- [14] Qian Zhang, Yilan Kang, Zheng Zheng, Lihui Wang, “Inverse analysis and modeling for tunneling thrust on shield machine”, Mathematical Problems in Engineering, 2013,2013:1-9. (SCI: 271ZB, EI:20140817346441).
- [15] Qian Zhang, Tian Huang, Ganyun Huang, Zongxi Cai, Yilan Kang, “Theoretical model for loads prediction on shield tunneling machine with consideration of soil-rock interbedded ground”, Science China Technological Sciences,2013,56(9):2259-2267. (SCI:206LM, EI:20133616708294 ).
- [16] HaoZhang, HaipengSong, YilanKang, GanyunHuang, ChuanyongQu. “Experimental Analysis on Deformation Evolution and Crack Propagation of Rock Under Cyclic Indentation”,Rock Mechanics and Rock Engineering. 2013,46(5):1053-1059. (SCI:208IC,EI :20133716724077).
- [17] Hao Zhang, Ganyun Huang, Haipeng Song, Yilan Kang, “Experimental characterization of strain localization in rock”, Geophysical Journal International, 2013, 194(3):1554-1558. (SCI:205KJ, EI:20133516666955).
- [18] Haipeng Song, Hao Zhang, Donghui Fu, Yilan Kang, Ganyun Huang, Chuanyong Qu, Zongxi Cai. “Experimental Study on Damage Evolution of Rock under Uniform and Concentrated Loading Conditions using Digital Image Correlation”, Fatigue & Fracture of Engineering Materials & Structures, 2013, 36(8): 760-768. (SCI:188UY, EI:20133116570071 ).
- [19] Wei Qiu, Qiu Li, Zhenkun Lei, Qinghua Qin, Weilin Deng,Yilan Kang, “The use of a carbon nanotube sensor for measuring strain by micro-Raman spectroscopy”, Carbon, 2013, 53:161-168. (SCI: 075YD, EI:20125215832303 ).
- [20] Xiaohua Tan, Yilan Kang, Eann Patterson, “Calibration of a 3-D Digital Image Correlation system for large deformation contact problems”, Journal of Physics: Conference Series, 2012, 82(1): 012035. (SCI: BBZ91;EI: 20124415629476).
- [21] Hao Zhang, Ganyun Huang, Haipeng Song, Yilan Kang, “Experimental investigation of deformation and failure mechanisms in rock under indentation by digital image correlation”, Engineering Fracture Mechanics, 2012, 96:667-675. (SCI: 068RQ, EI: 20124815719237).
- [22] Qian Zhang, Chuanyong Qu, Zongxi Cai, Tian Huang, Yilan Kang, Ming Hu, Bin Dai, Jianzhong Leng, “Modeling Specific Energy for Shield Machine by Non-linear Multiple Regression Method and Mechanical Analysis”, Advances in Intelligent and Soft Computing, Springer, 2012, 144: 75-80. (SCI: BCI43,EI:20122615181500).
- [23] Qiu Li, Jianshan Wang, Yilan Kang, Yali Li, Qinghua Qin, Zhulin Wang, Xiaohua Zhong, “Multi-scale study of the strength and toughness of carbon nanotube fiber materials”, Materials Science and Engineering A, 2012, 549:118-122. (SCI: 960FQ, EI: 20122215066028).
- [24] Qian Zhang, Chuanyong Qu, Yilan Kang, Ganyun Huang, Zongxi Cai, Yu Zhao, Haifeng Zhao, Pengcheng Su, “Identification and Optimization of Energy Consumption by Shield Tunnel Machines Using a Combined Mechanical and Regression Analysis”, Tunnelling and Underground Space Technology, 2012, 28: 350-354. (SCI: 912VE, EI: 20120514728297).
- [25] Lihui Wang, Yilan Kang, Zongxi Cai, Qian Zhang, Yu Zhao, Haifeng Zhao, Pengcheng Su, “The energy method to predict disc cutter wear extent for hard rock TBMs”, Tunnelling and Underground Space Technology, 2012, 28: 183-191 (SCI: 912VE, EI: 20120514728279).
- [26] Xia Xiao, HaipengSong, Yilan Kang, XiaoLei Li, XiaoHua Tan, HaoYun Tan, “Experimental analysis of crack tip fields in rubber materials under large deformation” ACTA MECHANICA SINICA,2012, 28(2):432–437.(SCI: 939ZY ,EI: 20122215064932).
- [27] Qiu Li, Yilan Kang, Wei Qiu, Yali Li, Ganyun Huang, Jiangang Guo, Weilin Deng, Xiaohua Zhong, “Deformation mechanisms of carbon nanotube fibres under tensile loading by in-situ Raman spectroscopy analysis”, Nanotechnology, 2011,22(22):225704. (SCI: 750BE, EI: 20111613919311).
- [28] Lihui Wang, Chuanyong Qu, Yilan Kang, Cuixia Su, Yanqun Wang, Zongxi Cai, “A mechanical model to estimate the disc cutter wear of tunnel boring machines”, ADVANCED SCIENCE LETTERS, 2011, 4(6-7): 2433-2439, (SCI: 822OI).
- [29] Yilan Kang, HuiminXie, “Micro and nano metrology in experimental mechanics”, Optics and Lasers in Engineering, 2010, 48(11): 1045-1045. (SCI: 645ZX, EI: 20103313156776).
- [30] Wei Qiu, Yi-Lan Kang, Zhen-Kun Lei, Qing-Hua Qin, Qiu Li, Quan Wang, “Experimental study of the Raman strain rosette based on the carbon nanotube strain sensor”, Journal of Raman Spectroscopy, 2010, 41(10):1216-1220. (SCI: 677VW).
- [31] Qiu Li, Wei Qiu, Haoyun Tan, JiangangGuo, Yilan Kang, “Micro-Raman spectroscopy stress measurement method for porous silicon film”, Optics and Lasers in Engineering, 2010, 48(11): 1119–1125 (SCI: 645ZX, EI: 20103313156775).
- Books
- [1] Lei Zhenkun, Qiu Wei, Kang Yilan. Micro-Roman Spectrum and Experimental Mechanics. Science Press, 2015.
- [2] Wang Shibin, Kang Yilan. Mechanics of Materials. Higher Education Press, 2008.
- Patents
- [1] The calculation method of the optimal driving speed of tunneling machine in different geological conditions. License number:CN102147826A
- [2] A planar deformation nondestructive testing device based on carbon nanotubes for sensing medium. License number:CN102359764A
-
- [3] The polarization direction continuous synergistic and covariable-adjustable micro-raman spectroscopy experiment device.License number:CN102426163A
- [4] The calculation method of the bending moment of the shield plate under the upper and lower stratified geological conditions. License number:CN102289588A
- [5] The calculation method of frontal load of shield plate under different stratified geological conditions. License number:CN102262712A
- [6] The calculation method of pitch bending moment in the depth direction of shield tunneling. License number:CN102562079A
- [7] The calculation method of rotary moment when the shield tunneling is turned. License number:CN102562086B
- [8] Calculation method of positive torque of surface soil pressure balance shield. License number:CN103899328B