Education

2009.02~2012.01  The Hong Kong University of Science and Technology (No.27 | QS World University Rankings 2021), Hong Kong, China

                              PhD in Mechanical Engineering: Bio-manufacturing

                                   - Thesis: Topographical Effects on Bacterial Behaviors

                                   - Supervisor: Prof. Yang Leng

2006.09~2008.12  The Hong Kong University of Science and Technology (No.27 | QS World University Rankings 2021), Hong Kong, China

                              MPhil in Mechanical Engineering: Bio-manufacturing

                                   - Thesis: Electrochemical Deposition of Fluoridated Calcium Phosphate on Titanium Substrates

                                   - Supervisor: Prof. Yang Leng

2001.09~2005.06  Tianjin University (No.269 | QS World University Rankings 2025), Tianjin, China

                              BEng in Mechanical Design, Manufacturing and Automation

                                   - Thesis: The Electrospark Precision Dressing of Cast Iron Bonded Grinding Wheel Based on Nanometer Feed

                                   - Supervisor: Prof. Chengzu Ren

Working Experience

2024.07~   Now         Department of Mechanical Engineering, School of Mechanical Engineering, Tianjin University, Tianjin, China

                                  Doctoral Supervisor

2023.06~   Now         Department of Mechanical Engineering, School of Mechanical Engineering, Tianjin University, Tianjin, China  

                                  Associate Professor (Tenured)

2020.08~   Now         Department of Mechanical Engineering, School of Mechanical Engineering, Tianjin University, Tianjin, China

                                  Master Supervisor

2020.12~2021.06      Sports Center Sub-district Office, Nankai District, Tianjin, China

                                  Deputy Secretary of the Party Working Committee (Temporary, Deputy Department Level)

2016.08~2023.06      Department of Mechanical Engineering, School of Mechanical Engineering, Tianjin University, Tianjin, China

                                  Assistant Professor

2013.10~2016.08      Department of Manufacturing Design, Apple Inc., Shenzhen, China

                                  R&D Engineer

2013.07~2013.09      The Hong Kong University of Science and Technology (No.27 | QS World University Rankings 2021), Hong Kong, China

                                  Postdoc Research Assistant

2012.02~2013.07      Department of Manufacturing Design, Apple Inc., Shenzhen, China

                                  R&D Engineer

2005.07~2006.08     Tianjin Medical Devices Quality Supervision and Testing Center, SFDA of China, Tianjin, China

                                  Assistant Engineer

Research Interests

Bio-manufacturing, Antibacterial Biomaterials (for orthopedic, dental and other biomedical applications)

The research group has sufficient funds, harmonious relationship between teachers and students, and strong academic atmosphere. The research group has established long-term cooperative relations with many well-known universities abroad. Outstanding graduates can be recommended to Worcester Polytechnic Institute (USA), The Hong Kong University of Science and Technology, The Hong Kong University of Science and Technology (Guangzhou) and other well-known universities at home and abroad for further study. We welcome undergraduate and graduate students who are interested in bio-manufacturing research to join the research group. For more information, please contact xiang.ge@tju.edu.cn.

Courses

Engineering Graphics 1B  (Undergraduate Course, 48 Class Hours)

Engineering Graphics 2A  (Undergraduate Course, 48 Class Hours)

Engineering Graphics 2B  (Undergraduate Course, 64 Class Hours)

Fundamentals of Mechanical Engineering Training  (Undergraduate Course, 10 Class Hours)

Mechanical Engineering Training 2  (Undergraduate Practical Course)

Production Practice  (Undergraduate Practical Course)  (Course Leader)

Academic Part-Time Job

1.   SCIE Journal - Biomimetics (IF = 4.5，JCR Q1/Q2), Editorial Board Member

2.   SCIE Journal - Biomimetics (IF = 4.5，JCR Q1/Q2), Guest Editor of Special Issues

3.   International Journal - Exploration (Wiley Press), Youth Editorial Board Member

4.   National Graduate Education Evaluation and Monitoring Expert Database, Expert

5.   National Undergraduate Graduation Thesis (Design) Sampling Expert Database, Expert

6.   Tianjin Science and Technology Expert Database, 1^st Batch Expert

7.   Chinese Society of Mechanical Engineering, Senior Member

8.   SCIE Journal - Bioactive Materials (IF = 18.9，JCR Q1), Reviewer

9.   SCIE Journal - ACS Nano (IF = 17.1，JCR Q1), Reviewer

10. SCIE Journal - Chemical Engineering Journal (IF = 15.1，JCR Q1), Reviewer

11. SCIE Journal - Composites Part B: Engineering (IF = 13.1，JCR Q1), Reviewer

12. SCIE Journal - Advanced Healthcare Materials (IF = 10.0，JCR Q1), Reviewer

13. SCIE Journal - Acta Biomaterialia (IF = 9.7，JCR Q1), Reviewer

14. SCIE Journal - Biofabrication (IF = 9.0，JCR Q1), Reviewer

Academic Achievement

Xiang Ge, Associate Professor (Tenured) and Doctoral Supervisor of Tianjin University, is currently the Secretary of Tianjin Key Laboratory of Equipment Design and Manufacturing Technology and the Course Leader of Production Practice. He has been engaged in research in the field of bio-manufacturing and antibacterial biomaterials for a long time, and has worked in Tianjin Medical Devices Quality Supervision and Testing Center of the SFDA of China, Apple Inc., and The Hong Kong University of Science and Technology, with rich experience in production, learning and research industries. He is in charge of 1 National Natural Science Foundation of China (General Program), 1 National Key Research and Development Plan (Sub-project) (the 3^rd responsible person in charge of the subject), 1 Tianjin Natural Science Foundation (General Program), and 5 Tianjin University Independent Innovation Fund Programs; participated in 1 Tianjin Natural Science Foundation (Youth Program), 1 Tianjin University Independent Innovation Fund Program, and 1 horizontal program. He is in charge of 2 and participated in 5 Teaching Reform Programs. So far, he has published 46 academic papers in important scientific and technological journals, such as Advanced Functional Materials (IF = 19.0, JCR Q1), Bioactive Materials (IF = 18.9, JCR Q1), Composites Part B: Engineering (IF = 13.1, JCR Q1), Journal of Materials Science & Technology (IF = 10.9, JCR Q1), Advanced Healthcare Materials (IF = 10.0, JCR Q1), which have been cited 2,317 times in total, with an H-index of 24 (Google Scholar database, statistical data up to 2024.02.29). He has made more than 10 presentations at large international academic conferences such as Asian Biomaterials Congress (2009), National Biomaterials Congress (2010), MRS Spring Conference (2011), World Biomaterials Congress (2012), China Biomaterials Congress and International Advanced Biomaterials Congress (2019). He has 11 Chinese invention patents, 9 Chinese utility model patents, and 1 Japanese patent. He won one 1^st prize and one 3^rd prize of Tianjin Food and Drug Administration (Department Level) scientific and technological achievement award.

2020.07, Winner of Tianjin University Shen Zhikang Award

2017.12, Excellent Tutor of Tianjin University Undergraduate Graduation Design (Thesis) 2017

2006, Xiang Ge (Ranking 4/5), Study on mechanical properties and experimental methods of metal bone plates for surgical implants, Tianjin Food and Drug Administration (Department Level), Science and Technology Achievement Award, 1^st Prize

2006, Xiang Ge (Ranking 5/5), Study on mechanical properties and experimental methods of metal bone screws for surgical implants, Tianjin Food and Drug Administration (Department Level), Science and Technology Achievement Award, 3^rd Prize

Research Funding

A.  Research Programs (Principal Investigator)

1.   National Natural Science Foundation of China, General Program, 52075371, Study on biomimetic design and manufacture of micro-nano structure of titanium dioxide and its antibacterial mechanism, 2021.01~2024.12, 580,000 RMB, PI (National Level)

2.  National Key Research and Development Plan Program, "Manufacturing Basic Technology and Key Components" Key Program, 2018YFB2000400, Program Name "Ultra-precision manufacturing and testing technology of rolling bearing" (33,290,000 RMB), Project 04 Name "Bearing energy consumption coefficient detector”, Sub-project Name "Energy consumption characteristics of rolling bearings", 2019.07~2022.06, 100,000 RMB, PI of Sub-project (National Level)

3.   Tianjin Natural Science Foundation, General Program, 18JCYBJC19500, Study on the microfabrication technology and antibacterial mechanism of biomimetic pure titanium micrographic surface topography, 2018.04~2021.03, 100,000 RMB, PI (Provincial and Ministerial Level)

4.   Tianjin University Independent Innovation Fund, Innovation Platform Program, 2022XJD-0015, Study on frontier development of equipment design and advanced manufacturing, 2022.01~2022.12, 100,000 RMB, PI (University Level)

5.   Tianjin University Independent Innovation Fund, Strategic Layout Program, 2021XZS-0017, Study on advanced manufacturing and equipment design frontier development, 2021.01~2021.12, 100,000 RMB, PI (University Level)

6.   Tianjin University Independent Innovation Fund, Key Pre-study Program, 2020XYF-0020, Pre-study on new multifunctional superhydrophobic surfaces for a variety of biomedical applications, 2020.01~2020.12, 30,000 RMB, PI (University Level)

7.   Tianjin University Independent Innovation Fund, Strategic Layout Program, 2019XZS-0014, Study on advanced manufacturing technology and equipment design development, 2019.01~2019.12, 200,000 RMB, PI (University Level)

8.   Tianjin University Independent Innovation Fund, International Cooperation Program, 2018XGP-0030, Study on key technology of large aperture hole making for aero-laminated component, 2018.01~2018.12, 50,000 RMB, PI (University Level)

9.   Tianjin Key Laboratory of Equipment Design and Manufacturing Technology (Tianjin University), Open Project, Study on forming mechanism and tribological behavior of cylindrical roller based on double disc straight groove lapping, 2016.07~2018.06, 40,000 RMB, Co-PI

B.  Research Programs (Co-investigator)

10. Tianjin Natural Science Foundation, Youth Program, 21JCQNJC01360, Study on the mechanism of circ_0058514 regulating the immune response to open fracture wound of lower extremity through miR-19b-3p/ULK1, 2021.10~2023.09, 80,000 RMB, Co-investigator (Provincial and Ministerial Level)

11. Xinchang Zhejiang University of Technology Research Institute of Science and Technology, Natural Science Open Fund Program, 2021GKF-0316, Study on external circulation system construction and control strategy of new process of evolutionary grinding of bearing roller precision, 2021.01~2022.12, 50,000 RMB, Co-investigator (Horizontal)

12. Tianjin University Independent Innovation Fund, Strategic Layout Program, 2020XZS-0042, Study on frontier development and future trend of advanced manufacturing technology, 2020.01~2020.12, 200,000 RMB, Co-investigator (University Level)

13. Hong Kong Research Grants Council Program, 615408, Electrochemical surface modification of titanium implants for transcutaneous/transgingival devices, 2009.01~2012.06, Co-investigator

Publications

A.  Textbooks

1.   Modern Engineering Graphics, Higher Education Press, Published in 2024, Tianjin University Edition, In charge of the editing of Chapter 3

2.   Modern Engineering Graphics Problem Collection, Higher Education Press, Published in 2023, Tianjin University Edition, In charge of the editing of Chapter 3

B.  Journal Papers (1^st Author)

1.      Xiang Ge***, Chengzu Ren**, Yonghui Ding, Guang Chen, Xiong Lu, Kefeng Wang, Fuzeng Ren, Meng Yang, Zhuochen Wang, Junlan Li, Xinxin An, Bao Qian, Yang Leng*. Micro/nano-structured TiO₂ surface with dual-functional antibacterial effects for biomedical applications. Bioactive Materials, 4, 346-357, 2019. (Available online 1 November 2019) (SCI) (IF = 18.9) (JCR Q1)

https://doi.org/10.1016/j.bioactmat.2019.10.006

2.       Xiang Ge**, Jianming Zhao*, Karekin D. Esmeryan, Xiong Lu, Zhaoyang Li, Kefeng Wang, Fuzeng Ren, Qun Wang, Menghao Wang, Bao Qian. Cicada-inspired fluoridated hydroxyapatite nanostructured surfaces synthesized by electrochemical additive manufacturing. Materials & Design, 193, 108790, 2020. (Available online 16 May 2020) (SCI) (IF = 8.4) (JCR Q1)

https://doi.org/10.1016/j.matdes.2020.108790

3.       Xiang Ge**, Jianming Zhao*, Xiong Lu, Zhaoyang Li, Kefeng Wang, Fuzeng Ren, Menghao Wang, Qun Wang, Bao Qian. Controllable phase transformation of fluoridated calcium phosphate ultrathin coatings for biomedical applications. Journal of Alloys and Compounds, 847, 155920, 2020. (Available online 9 June 2020) (SCI) (IF = 6.2) (JCR Q1/Q2)

https://doi.org/10.1016/j.jallcom.2020.155920

4.       Xiang Ge**, Chengzu Ren*, Xiong Lu, Zhaoyang Li, Guang Chen, Kefeng Wang, Fuzeng Ren, Qun Wang, Menghao Wang, Xinxin An, Bao Qian. Surfactant-free electrochemical synthesis of fluoridated hydroxyapatite nanorods for biomedical applications. Ceramics International, 45, 17336-17343, 2019. (Available online 28 May 2019) (SCI) (IF = 5.2) (JCR Q1)

https://doi.org/10.1016/j.ceramint.2019.05.292

5.       Xiang Ge**, Yang Leng*, Xiong Lu, Fuzeng Ren, Kefeng Wang, Yonghui Ding, Meng Yang. Bacterial responses to periodic micropillar array. Journal of Biomedical Materials Research Part A, 103A, 384-396, 2015. (Version of Record online 09 April 2014) (SCI) (IF = 4.9) (JCR Q2)

https://doi.org/10.1002/jbm.a.35182

6.       Xiang Ge, Yang Leng*, Fuzeng Ren, Xiong Lu. Integrity and zeta potential of fluoridated hydroxyapatite nanothick coatings for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 4, 1046-1056, 2011. (Available online 12 March 2011) (SCI) (IF = 3.9) (JCR Q2/Q3)

https://doi.org/10.1016/j.jmbbm.2011.03.013

7.       Xiang Ge, Yang Leng*, Chongyun Bao, Sherry Li Xu, Renke Wang, Fuzeng Ren. Antibacterial coatings of fluoridated hydroxyapatite for percutaneous implants. Journal of Biomedical Materials Research Part A, 95A, 588-599, 2010. (Version of Record online 19 August 2010) (SCI) (IF = 4.9) (JCR Q2)

https://doi.org/10.1002/jbm.a.32862

8.       Xiang Ge*. Antimicrobial biomaterials with non-antibiotic strategy. Biosurface and Biotribology, 5 (3), 71-82, 2019. (Published 20 June 2019) (EI) (Invited Review)

https://doi.org/10.1049/bsbt.2019.0010

9.       Xiang Ge, Fuzeng Ren, Yang Leng*. Electrochemical deposition of fluoridated calcium phosphate thin film on titanium substrates. Advanced Materials Research, 47-50,1387-1390, 2008. (Online since June 2008) (EI)

https://doi.org/10.4028/www.scientific.net/AMR.47-50.1387

C.  Journal Papers (Corresponding Author)

10.    Jingyu Liu, Yifan Wang, Yanqin Liang, Shengli Zhu, Hui Jiang, Shuilin Wu, Xiang Ge**, Zhaoyang Li*. Effect of platelet-rich plasma addition on the chemical properties and biological activity of calcium sulfate hemihydrate bone cement. Biomimetics, 8 (2), 262, 2023. (Published 15 June 2023) (SCI) (IF = 4.5) (JCR Q1/Q2)  Corresponding Author

https://doi.org/10.3390/biomimetics8020262

11.    Xuqiu Bai, Zhichun Xu, Xianyi Li, Tiantian Zhao, Xiang Ge**, Caideng Yuan*. A simple and efficient strategy for preparation of flexible strain sensors based on marangoni effect. Coatings, 13 (6), 1101, 2023. (Published 15 June 2023) (SCI) (IF = 3.4) (JCR Q2/Q3)  Corresponding Author

https://doi.org/10.3390/coatings13061101

12.    Jintong Han, Xiaoqiang Zheng, Jingyu Liu, Yifan Wang, Zhenduo Cui, Shuilin Wu, Yanqin Liang, Shengli Zhu, Xiang Ge**, Zhaoyang Li*. Modification and evaluation of diatrizoate sodium containing polymethyl methacrylate bone cement. Journal of Biomaterials Applications, 37 (7), 1300-1314, 2023. (First published online 6 January 2023) (SCI) (IF = 2.9) (JCR Q3/Q4)  Corresponding Author

https://doi.org/10.1177/08853282221150359

13.    Xiaoqiang Zheng, Yifan Wang, Jingyu Liu, Jintong Han, Zhenduo Cui, ShuilinWu, Yanqin Liang, Shengli Zhu, Xiang Ge**, Zhaoyang Li*. Gelatin/gentamicin sulfate-modified PMMA bone cement with proper mechanical properties and high antibacterial ability. Materials Research Express, 9, 035405, 2022. (Published 31 March 2022) (SCI) (IF = 2.3) (JCR Q3)  Corresponding Author

https://doi.org/10.1088/2053-1591/ac5e1f

14.    Jiaqi Geng, Yuanli Men, Chen Liu, Xiang Ge**, Caideng Yuan*. Preparation of rGO@Fe₃O₄ nanocomposite and its application to enhance the thermal conductivity of epoxy resin. RSC Advances, 11, 27, 16592-16599, 2021. (Accepted 27 April 2021) (SCI) (IF = 3.9) (JCR Q2)  Corresponding Author

https://doi.org/10.1039/D1RA02254G

15.    Mengjing Wang, Xiang Ge**, Zhenduo Cui, Shuilin Wu, Shengli Zhu, Yanqin Liang, Zhaoyang Li*, William Weijia Lu. Influences of strontium on the phase composition and lattice structure of biphasic calcium phosphate. Ceramics International, 47, 16248-16255, 2021. (Available online 23 February 2021) (SCI) (IF = 5.2) (JCR Q1)  Corresponding Author

https://doi.org/10.1016/j.ceramint.2021.01.295

16.    Zihang Zhou, Qun Wang, Xiang Ge**, Zhaoyang Li*. Synthesis, characterization and simulation studies of strontium doped hydroxyapatite nanoparticles. Journal of Inorganic Materials, 35, 11, 1283-1289, 2020. (Available online November 2020) (SCI) (IF = 1.7) (JCR Q2)  Corresponding Author

https://doi.org/10.15541/jim20190439

17.    Lina Zhou**, Xiang Ge*, Chengzu Ren, Guang Chen. In-situ high temperature XRD and TEM study of the thermal stability and sintering behavior of octacalcium phosphate. Journal of Alloys and Compounds, 778, 72-76, 2019. (Available online 12 November 2018) (SCI) (IF = 6.2) (JCR Q1/Q2)  Corresponding Author

https://doi.org/10.1016/j.jallcom.2018.11.124

D.  Journal Papers (Co-Author)

18.    Yawen Huang, Xinyue Zhang, Ruiqi Mao, Dongxuan Li, Fengxiong Luo, Ling Wang, Yafang Chen, Jian Lu, Xiang Ge, Yue Liu, Xusheng Yang, Yujiang Fan, Xingdong Zhang, Kefeng Wang*. Nucleation domains in biomineralization: biomolecular sequence and conformational features. Inorganic Chemistry, xx, xxx, 2024. (Publication Date 26 December 2023) (SCI) (IF = 4.6) (JCR Q1)

https://doi.org/10.1021/acs.inorgchem.3c03576

19.    Ling Wang, Dongxuan Li, Yawen Huang, Ruiqi Mao, Boqing Zhang, Fengxiong Luo, Peiyang Gu, Ping Song, Xiang Ge, Jian Lu, Xusheng Yang, Yujiang Fan, Xingdong Zhang, Kefeng Wang*. Bionic mineralized 3D printed scaffolds with enhanced in-situ mineralization for cranial bone regeneration. Advanced Functional Materials, xx, 2309042, 2024. (Published online 15 October 2023) (SCI) (IF = 19.0) (JCR Q1)

https://doi.org/10.1002/adfm.202309042

20.    Fengxiong Luo, Dongxuan Li, Yawen Huang, Ruiqi Mao, Ling Wang, Jian Lu, Xiang Ge, Yujiang Fan, Xingdong Zhang, Yafang Chen**, Kefeng Wang*. Efficient osteogenic activity of PEEK surfaces achieved by femtosecond laser−hydroxylation. ACS Applied Materials & Interfaces, 15, 37232-37246, 2023. (Published 24 July 2023) (SCI) (IF = 9.5) (JCR Q1/Q2)

https://doi.org/10.1021/acsami.3c06430

21.    Xuqiu Bai, Jun Zheng, Zhichun Xu, Fei Pan, Xiang Ge, Caideng Yuan*. Ultrathin CNTs film based on marangoni effect for strain sensing application. Coatings, 13 (6), 1026, 2023. (Published 1 June 2023) (SCI) (IF = 3.4) (JCR Q2/Q3)

https://doi.org/10.3390/coatings13061026

22.    Ruiqi Mao, Yixiang Lai, Dongxuan Li, Yawen Huang, Ling Wang, Fengxiong Luo, Yafang Chen, Jian Lu, Xiang Ge, Yue Liu, Yujiang Fan, Xingdong Zhang, Qing Jiang**, Kefeng Wang*. Flow channel performance in 3D printed hydroxyapatite scaffolds to improve metabolism and tissue ingrowth in flat bone repair. Composites Part B: Engineering, 259, 110727, 2023. (Available online 11 April 2023) (SCI) (IF = 13.1) (JCR Q1)

https://doi.org/10.1016/j.compositesb.2023.110727

23.    Chen Liu, Xiang Ge, Jiaqi Geng, Yuanli Men, Caideng Yuan*. Effects of graphene morphology on properties of carbon nanotube/polyurethane film strain sensors. Coatings, 12 (12), 1889, 2022. (Published 5 December 2022) (SCI) (IF = 3.4) (JCR Q2/Q3)

https://doi.org/10.3390/coatings12121889

24.    Mingyu Zhu, Ju Fang, Yulei Li, Chuanxin Zhong, Shihui Feng, Xiang Ge, Haixia Ye, Xiaofei Wang, Weiwei Zhu, Xiong Lu, Fuzeng Ren*. The synergy of topographical micropatterning and Ta|TaCu bilayered thin film on titanium implants enables dual-functions of enhanced osteogenesis and anti-infection. Advanced Healthcare Materials, 10, 2002020, 2021. (Published online 11 March 2021) (SCI) (IF = 10.0) (JCR Q1)

https://doi.org/10.1002/adhm.202002020

25.    Tian Wan, Kangjie Chu, Ju Fang, Chuanxin Zhong, Yiwen Zhang, Xiang Ge, Yonghui Ding, Fuzeng Ren*. A high strength, wear and corrosion-resistant, antibacterial and biocompatible Nb-5 at.% Ag alloy for dental and orthopedic implants. Journal of Materials Science & Technology, 80, 266–278, 2021. (Available online 24 December 2020) (SCI) (IF = 10.9) (JCR Q1)

https://doi.org/10.1016/j.jmst.2020.11.049

26.    Donglin Gan, Zhixiong Wang, Chaoming Xie, Xiao Wang, Wensi Xing, Xiang Ge, Huipin Yuan, Kefeng Wang, Hui Tan*, Xiong Lu*. Mussel-inspired tough hydrogel with in situ nanohydroxyapatite mineralization for osteochondral defect repair. Advanced Healthcare Materials, 8, 1901103, 2019. (Version of Record online 14 October 2019) (SCI) (IF = 10.0) (JCR Q1)

https://doi.org/10.1002/adhm.201901103

27.    Qun Wang, Pengfei Li, Pengfei Tang, Xiang Ge, Fuzeng Ren, Cancan Zhao, Ju Fang, Kefeng Wang, Liming Fang, Yan Li, Chongyun Bao, Xiong Lu*, Ke Duan*. Experimental and simulation studies of strontium/fluoride-codoped hydroxyapatite nanoparticles with osteogenic and antibacterial activities. Colloids and Surfaces B: Biointerfaces, 182, 110359, 2019. (Available online 20 July 2019) (SCI) (IF = 5.8) (JCR Q1/Q2)

https://doi.org/10.1016/j.colsurfb.2019.110359

28.    Lu Han, Yanan Jiang, Chen Lv, Donglin Gan, Kefeng Wang*, Xiang Ge, Xiong Lu. Mussel-inspired hybrid coating functionalized porous hydroxyapatite scaffolds for bone tissue regeneration. Colloids and Surfaces B: Biointerfaces, 179, 470-478, 2019. (Available online 14 April 2019) (SCI) (IF = 5.8) (JCR Q1/Q2)

https://doi.org/10.1016/j.colsurfb.2019.04.024

29.    Yuanchen Li, Xiang Ge, Hui Wang, Yingbin Hu, Fuda Ning, Weilong Cong, Chengzu Ren*. Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests. Ceramics International, 45, 4729-4738, 2019. (Available online 22 November 2018) (SCI) (IF = 5.2) (JCR Q1)

https://doi.org/10.1016/j.ceramint.2018.11.165

30.    Donglin Gan, Tong Xu, Wensi Xing, Xiang Ge, Liming Fang, Kefeng Wang, Fuzeng Ren, Xiong Lu*. Mussel-inspired contact-active antibacterial hydrogel with high cell affinity, toughness, and recoverability. Advanced Functional Materials, 29, 1805964, 2019. (Version of Record online 13 November 2018) (SCI) (IF = 19.0) (JCR Q1)

https://doi.org/10.1002/adfm.201805964

31.    Donglin Gan, Tong Xu, Wensi Xing, Menghao Wang, Ju Fang, Kefeng Wang, Xiang Ge, Chun Wai Chan, Fuzeng Ren, Hui Tan*, Xiong Lu*. Mussel-inspired dopamine oligomer intercalated tough and resilient gelatin methacryloyl (GelMA) hydrogels for cartilage regeneration. Journal of Materials Chemistry B, 7, 1716-1725, 2019. (First published 01 Oct 2018) (SCI) (IF = 7.0) (JCR Q1)

https://doi.org/10.1039/C8TB01664J

32.    Pengfei Li, Zhanrong Jia, Qun Wang, Pengfei Tang, Menghao Wang, Kefeng Wang, Ju Fang, Cancan Zhao, Fuzeng Ren, Xiang Ge, Xiong Lu*. A resilient and flexible chitosan/silk cryogel incorporated Ag/Sr co-doped nanoscale hydroxyapatite for osteoinductivity and antibacterial properties. Journal of Materials Chemistry B, 6, 7427-7438, 2018. (First published 05 Oct 2018) (SCI) (IF = 7.0) (JCR Q1)

https://doi.org/10.1039/C8TB01672K

33.    Guang Chen*, Chengzu Ren, Lianpeng Lu, Zhihong Ke, Xuda Qin, Xiang Ge. Determination of ductile damage behaviors of high strain rate compression deformation for Ti-6Al-4V alloy using experimental-numerical combined approach. Engineering Fracture Mechanics, 200, 499-520, 2018. (Available online 18 August 2018) (SCI) (IF = 5.4) (JCR Q1)

https://doi.org/10.1016/j.engfracmech.2018.08.020

34.    Qun Wang, Pengfei Tang, Xiang Ge, Pengfei Li, Chen Lv, Menghao Wang, Kefeng Wang, Liming Fang*, Xiong Lu*. Experimental and simulation studies of strontium/zinc-codoped hydroxyapatite porous scaffolds with excellent osteoinductivity and antibacterial activity. Applied Surface Science, 462, 118-126, 2018. (Available online 7 August 2018) (SCI) (IF = 6.7) (JCR Q1/Q2)

https://doi.org/10.1016/j.apsusc.2018.08.068

35.    Guang Chen*, Lianpeng Lu, Chengzu Ren, Xiang Ge. Temperature dependent negative to positive strain rate sensitivity and compression behavior for 2024-T351 aluminum alloy. Journal of Alloys and Compounds, 765, 569-585, 2018. (Available online 19 June 2018) (SCI) (IF = 6.2) (JCR Q1/Q2)

https://doi.org/10.1016/j.jallcom.2018.06.196

36.    Meng Yang, Yonghui Ding, Xiang Ge, Yang Leng*. Control of bacterial adhesion and growth on honeycomb-like patterned surfaces. Colloids and Surfaces B: Biointerfaces, 135, 549-555, 2015. (Available online 13 August 2015) (SCI) (IF = 5.8) (JCR Q1/Q2)

https://doi.org/10.1016/j.colsurfb.2015.08.010

37.    Yonghui Ding, Yang Leng*, Nan Huang, Ping Yang, Xiong Lu, Xiang Ge, Fuzeng Ren, Kefeng Wang, Lijuan Lei, Xiang Guo. Effects of microtopographic patterns on platelet adhesion and activation on titanium oxide surfaces. Journal of Biomedical Materials Research Part A, 101 A (3), 622-632, 2013. (Version of Record online 28 August 2012) (SCI) (IF = 4.9) (JCR Q2)

https://doi.org/10.1002/jbm.a.34361

38.    Kefeng Wang*, Yang Leng*, Xiong Lu, Fuzeng Ren, Xiang Ge, Yonghui Ding. Theoretical analysis of protein effects on calcium phosphate precipitation in simulated body fluid. CrystEngComm, 14 (18), 5870-5878, 2012. (First published 07 June 2012) (SCI) (IF = 3.1) (JCR Q1/Q3)

https://doi.org/10.1039/C2CE25216C

39.    Fuzeng Ren*, Yonghui Ding, Xiang Ge, Xiong Lu, Kefeng Wang, Yang Leng. Growth of one-dimensional single-crystalline hydroxyapatite nanorods. Journal of Crystal Growth, 349 (1), 75-82, 2012. (Available online 6 April 2012) (SCI) (IF = 1.8) (JCR Q3/Q4)

https://doi.org/10.1016/j.jcrysgro.2012.04.003

40.    Kefeng Wang*, Yang Leng*, Xiong Lu, Fuzeng Ren, Xiang Ge. Study of protein adsorption on octacalcium phosphate surfaces by molecular dynamics simulations. Journal of Materials Science: Materials in Medicine, 23 (4), 1045-1053, 2012. (Published 14 February 2012) (SCI) (IF = 3.7) (JCR Q2/Q3)

https://doi.org/10.1007/s10856-012-4570-1

41.    Xiong Lu*, Hongping Zhang, Yanan Guo, Yingbo Wang, Xiang Ge, Yang Leng, Fumio Watari. Hexagonal hydroxyapatite formation on TiO₂ nanotubes under urea modulation. CrystEngComm, 13, 3741-3749, 2011. (First published 24 Mar 2011) (SCI) (IF = 3.1) (JCR Q1/Q3)

https://doi.org/10.1039/C0CE00971G

42.    Juliana T.Y. Lee*, Yang Leng, King L. Chow, Fuzeng Ren, Xiang Ge, Kefeng Wang, Xiong Lu. Cell culture medium as an alternative to conventional simulated body fluid. Acta Biomaterialia, 7, 2615-2622, 2011. (Available online 26 February 2011) (SCI) (IF = 9.7) (JCR Q1)

https://doi.org/10.1016/j.actbio.2011.02.034

43.    Fuzeng Ren, Yang Leng*, Renlong Xin, Xiang Ge. Synthesis, characterization and ab initio simulation of magnesium-substituted hydroxyapatite. Acta Biomaterialia, 6, 2787-2796, 2010. (Available online 29 December 2009) (SCI) (IF = 9.7) (JCR Q1)

https://doi.org/10.1016/j.actbio.2009.12.044

44.    Xiaomin Liu, Shuxin Qu*, Xiong Lu, Xiang Ge, Yang Leng. Time-of-flight secondary ion mass spectrometry study on the distribution of alendronate sodium in drug-loaded ultra-high molecular weight polyethylene. Biomedical Materials, 4, 065008, 2009. (Published 7 December 2009) (SCI) (IF = 4.0) (JCR Q2/Q3)

https://doi.org/10.1088/1748-6041/4/6/065008

45.    Fuzeng Ren, Renlong Xin, Xiang Ge, Yang Leng*. Characterization and structural analysis of zinc-substituted hydroxyapatites. Acta Biomaterialia, 5, 3141-3149, 2009. (Available online 4 May 2009) (SCI) (IF = 9.7) (JCR Q1)

https://doi.org/10.1016/j.actbio.2009.04.014

46.    Fuzeng Ren, Renlong Xin, Xiang Ge, Yang Leng*. An experimental and computational study on Zn-substituted hydroxyapatite. Advanced Materials Research, 47-50, 1379-1382, 2008. (Online since June 2008) (EI)

https://doi.org/10.4028/www.scientific.net/AMR.47-50.1379